Industry News
Modular Boring Head Systems vs Solid Boring Bars — Inventory Cost Comparison for Job Shops Running 50+ Part Numbers
2026-07-09
At a tooling expo in Chicago in 2023, a shop owner from a mid-sized precision machining facility in Ohio approached our booth with a problem that I have heard from dozens of job shop owners acros...
view
detail
Three Signs Your Solid Carbide End Mill Is Running Too Hot for Titanium Aerospace Parts — And How Coating Selection Fixes It
2026-07-08
We reveal the three thermal-overload warning signs that destroy end mills in titanium aerospace machining, and show how the right coating fixes each one.
view
detail
A Mold Shop in Turkey Eliminated Runout-Induced Surface Defects by Upgrading to HSK63F Tool Holders
2026-07-07
This article breaks down exactly what they did, why HSK63F was the right interface, and how any mold shop facing similar surface-finish bottlenecks can apply the same approach.
view
detail
Which Insert Grade Holds Edge Integrity Longer in Cast Iron Cylinder Bore Roughing — CVD Coated Carbide or Ceramic
2026-07-06
We have spent the past eighteen months running controlled cutting tests on G25 gray iron cylinder blocks at our facility in Ningbo, comparing our QC1125 CVD coated carbide grade against a commerc...
view
detail
Why Anti-Vibration Tooling Beats Standard Holders for Heavy-Duty Milling — A Factory Guide to Chatter-Free Machining with Custom Boring Bars and Face Mills
2026-07-03
Standard tool holders fail in heavy-duty milling and deep-bore finishing when L/D ratios exceed 4:1 — regenerative chatter degrades surface finish and shortens tool life.
view
detail
3 Custom Turning Tool Configurations for CNC Shops — Carbide Insert Grades, Tool Holders, and Chip Control for Stainless Steel and Alloy Steel Parts
2026-07-02
This guide presents three field-tested custom turning tool configurations for CNC shops working with stainless steel and alloy steel.
view
detail
CNC Cutting Tool OEM from China — Indexable Face Mills, Angle Heads & Boring Tools for Precision Machining Shops
2026-07-01
Precision machining shops worldwide depend on high-quality cutting tools to achieve tight tolerances, superior surface finishes, and consistent tool life.
view
detail
Indexable Cutting Tools and CNC Tool Holders — Boring Tools, Milling Cutters, and Carbide Inserts for Precision Machining from Derekmall
2026-06-30
For procurement professionals in the international industrial supply chain, the careful, thorough, and systematic selection of a reliable and capable OEM manufacturing partner for boring tools
view
detail
How Do Czech Automotive Suppliers Select Boring Tool Insert Coatings for Cast Iron Engine Blocks?
2026-06-29
CVD Al₂O₃-based coatings outperform PVD options for cast iron boring due to superior thermal barrier properties at chip-tool interface temperatures exceeding 800 °C.
view
detail
3 Interface Standards to Check When Ordering Tool Holders for High-Speed Machining Centers
2026-06-26
A 0.003 mm difference in taper contact can cut tool life by 40%. Here are the three interface standards I verify before any high-speed tool holder leaves our facility.
view
detail