Anti-Vibration Holders
0102030405
Anti-vibration Boring System Various Structural Forms Meet Diversified Machining Needs
derekdescription
01
SCBH Finish Boring
The boring head is equipped with vibration reduction, The function of CBH finish boring head remains unchanged, and they are syncretized with each other.
01
SDCK Boring Adaptor
Vibration reduction attached on DCK boring adaptor could receive better machining result during deep hole machining.
01
SDCK Extension
Smoothly interconnecting with existing standard boring head and boring adaptor by DCK connector and vibration reduction.
01
SCB-SDCK Boring Bar
Vibration reduction attached, DCK boring adaptor at the front and power chucks with various cone at the back. And it also meets the needs of small but deep hole machining.
derekContrast Experiment
| 42CrMo (HRC40) Finish Boring | ||||
|
× Vibrating ○ Steady ◎ Superior |
||||
|
Specification |
Cutting speed (m/min) |
|||
|
50 |
80 |
100 |
150 |
|
| BBT50-DCK5-263 DCK5-CBH53-95 ( L/D=5.8 ) |
|
|
|
|
| BBT50-DCK5-263 DCK5-SCBH53-215 ( L/D=8.6 ) |
|
|
|
|
derekSFMB/SDSC Anti-vibration Holder For Face Mill And
01
Features:
Standard stock for 7D, 10D tools
Both type holders available for face mill and side cutter
Machining Vc 200M/min without vibration
Tailor made service is available
derekDCK-SCBH Anti-vibration Finish Boring
| Specification | D1 | L | Boring range | Adapter size | Cartridge | Insert | Screw | Wrench | Weight |
| DCK1-SCBH20-110 | 19 | 110 | 20-26 | DCK1 | CBH1-1 | TPGH0802 | M020D055 | Q06 | 0.29 |
| DCK2-SCBH25-130 | 24 | 130 | 25-33 | DCK2 | CBH2-1 | 0.55 | |||
| DCK3-SCBH32-150 | 31 | 150 | 32-42 | DCK3 | CBH3-1 | 1.09 | |||
| DCK4-SCBH41-190 | 39 | 190 | 41-54 | DCK4 | CBH4-1 | TCMT1102 (With) TPGH1103 (For choice) | M025W060 M030W070 | Q08 | 2.08 |
| DCK5-SCBH53-215 | 50 | 215 | 53-70 | DCK5 | CBH5-1 | 3.86 | |||
| DCK6-SCBH68-245 | 64 | 245 | 68-100 | DCK6 | CBH6-1 | 7.73 | |||
| DCK7-SCBH100-245 | 90 | 245 | 100-153 | DCK7 | CBH6-1 | 11.73 | |||
| 90 | 245 | 126-179 | DCK7 | CBH6-2 | 11.73 | ||||
| 90 | 245 | 150-203 | DCK7 | CBH6-3 | 11.73 |
derekSDCK Anti-vibration Extension
| Specification | D | d1 | d2 | L | Side-lock screw | Wrench | Weight |
| SDCK2-2-90 | 24 | 14 | 14 | 90 | M050Z060-30P-D | L025 | 0.33 |
| SDCK3-3-115 | 31 | 18 | 18 | 115 | M060Z090-30P-D | L03 | 0.75 |
| SDCK4-4-125 | 39 | 22 | 22 | 125 | M080Z120-30P-D | L04 | 1.14 |
| SDCK5-5-155 | 50 | 28 | 28 | 155 | M100Z160-30P-D | L05 | 2.39 |
| SDCK6-6-185 | 64 | 36 | 36 | 185 | M120Z200-30P-D | L06 | 5.11 |
derekBT-SDCK Anti-vibration Boring Adapter
| Specification | D | d | L1 | L2 | L | Side-lock screw | L Wrench | Weight |
| BT40-SDCK2-145 | 24 | 14 | 6.45 | 110 | 145 | M050Z060-30P-D | L025 | 1.44 |
| BT40-SDCK2-170 | 24 | 14 | 6.45 | 135 | 170 | M050Z060-30P-D | L025 | 1.54 |
| BT40-SDCK2-195 | 24 | 14 | 6.45 | 160 | 195 | M050Z060-30P-D | L025 | 1.64 |
| BT40-SDCK3-195 | 31 | 18 | 7.9 | 160 | 195 | M060Z090-30P-D | L03 | 2.15 |
| BT40-SDCK3-225 | 31 | 18 | 7.9 | 190 | 225 | M060Z090-30P-D | L03 | 2.37 |
| BT40-SDCK3-255 | 31 | 18 | 7.9 | 220 | 255 | M060Z090-30P-D | L03 | 2.59 |
| BT40-SDCK4-240 | 39 | 22 | 10 | 205 | 240 | M080Z120-30P-D | L04 | 3.07 |
| BT40-SDCK4-280 | 39 | 22 | 10 | 245 | 280 | M080Z120-30P-D | L04 | 3.50 |
| BT40-SDCK4-320 | 39 | 22 | 10 | 285 | 320 | M080Z120-30P-D | L04 | 3.93 |
| BT40-SDCK5-315 | 50 | 28 | 13 | 283 | 315 | M100Z160-30P-D | L05 | 5.65 |
| BT50-SDCK2-165 | 24 | 14 | 6.45 | 117 | 165 | M050Z060-30P-D | L025 | 4.12 |
| BT50-SDCK2-190 | 24 | 14 | 6.45 | 142 | 190 | M050Z060-30P-D | L025 | 4.22 |
| BT50-SDCK2-215 | 24 | 14 | 6.45 | 167 | 215 | M050Z060-30P-D | L025 | 4.32 |
| BT50-SDCK3-205 | 31 | 18 | 7.9 | 160 | 205 | M060Z090-30P-D | L03 | 4.80 |
| BT50-SDCK3-235 | 31 | 18 | 7.9 | 190 | 235 | M060Z090-30P-D | L03 | 5.02 |
| BT50-SDCK3-265 | 31 | 18 | 7.9 | 220 | 265 | M060Z090-30P-D | L03 | 5.24 |
| BT50-SDCK4-255 | 39 | 22 | 10 | 210 | 255 | M080Z120-30P-D | L04 | 5.89 |
| BT50-SDCK4-295 | 39 | 22 | 10 | 250 | 295 | M080Z120-30P-D | L04 | 6.27 |
| BT50-SDCK4-335 | 39 | 22 | 10 | 290 | 335 | M080Z120-30P-D | L04 | 6.65 |
| BT50-SDCK5-315 | 50 | 28 | 13 | 270 | 315 | M100Z160-30P-D | L05 | 8.51 |
| BT50-SDCK5-360 | 50 | 28 | 13 | 315 | 360 | M100Z160-30P-D | L05 | 9.30 |
| BT50-SDCK5-405 | 50 | 28 | 13 | 360 | 405 | M100Z160-30P-D | L05 | 10.09 |
| BT50-SDCK6-380 | 64 | 36 | 16 | 335 | 380 | M120Z200-30P-D | L06 | 12.56 |
| BT50-SDCK6-445 | 64 | 36 | 16 | 400 | 445 | M120Z200-30P-D | L06 | 14.24 |
| BT50-SDCK6-510 | 64 | 36 | 16 | 465 | 510 | M120Z200-30P-D | L06 | 15.93 |
derekSCB-SDCK Anti-vibration Boring Bar
| Specification | D1 | D | Z | L1 | L | Weight |
| SCB-C19-SDCK1-190 | 19 | 20-36 | 133 | 190 | 222 | 0.43 |
| SCB-C19-SDCK1-240 | 190 | 240 | 272 | 0.77 | ||
| SCB-C24-SDCK2-220 | 24 | 25-47 | 168 | 220 | 255 | 0.79 |
| SCB-C24-SDCK2-280 | 240 | 280 | 315 | 1.43 | ||
| SCB-C32-SDCK3-280 | 32 | 33-60 | 224 | 280 | 320 | 1.78 |
| SCB-C32-SDCK3-350 | 320 | 350 | 390 | 3.24 |
derekBT-SFMB Anti-vibration Face Mill Holder
| Specification | D1 | D2 | d | L | L1 | L2 | Locking screw for cutter | Washer | Weight |
| BT50-SFMB22-D48-300 | 48 | 48 | 22 | 300 | 255 | 18 | E100U300 | - | 7.9 |
| BT50-SFMB22-D48-400 | 48 | 48 | 22 | 400 | 355 | 18 | E100U300 | - | 9.3 |
| BT50-SFMB22-D58-400 | 58 | 61 | 22 | 400 | 355 | 18 | E100U300 | - | 12.5 |
| BT50-SFMB22-D58-500 | 58 | 61 | 22 | 500 | 455 | 18 | E100U300 | - | 14.9 |
| BT50-SFMB27-D58-400 | 58 | 61 | 27 | 400 | 355 | - | E120U300 | FM-1 | 13.7 |
| BT50-SFMB27-D58-500 | 58 | 61 | 27 | 500 | 455 | - | E120U300 | FM-1 | 15.1 |
| BT50-SFMB27-D58-400 | 74 | 78 | 27 | 500 | 455 | - | E120U300 | FM-1 | 21.2 |
| BT50-SFMB27-D58-500 | 74 | 78 | 27 | 600 | 555 | - | E120U300 | FM-1 | 24.9 |
| BT50-SFMB27-D58-400 | 74 | 78 | 32 | 500 | 455 | - | E160U350 | FM-2 | 21.4 |
| BT50-SFMB27-D58-500 | 74 | 78 | 32 | 600 | 555 | - | E160U350 | FM-2 | 25.1 |